Dedalo Pick-Upfrom 18 to 36 meters300 kg
Request a quotation This unit is one of the most sophisticated aerial lifting
systems for handling requirements like furniture transport and
removals, windows and doors and building materials in general. It features
an especially rugged construction by reduced weight and dimensions.
Designed for most varied applications and working conditions, this unit is
capable of withstand in very high loads. The DEDALO pick-up is specially
recommended for working in narrow historical city areas where travelling
and working is greatly facilitated by a compact size and a fully
electrical very powerful power supply system (platform speed of 45
m/min.). Gasoline engine is also available on request.
The highest ladder extension varies from 18 up to 36 m depending on which
model and thus allows reaching out from first to eleventh floor with a
unique performance.
Designed in accordance with European Directive no. 2006/42/CE, this unit
is entirely developed and manufactured by Scala Reale with special concern
for operators safety.
The above picture show a typical version of the pick-up model Dedalo 7.5050 (30.5 m high) mounted on TOYOTA HI-LUX 2WD pick-up, with 4 hydraulic stabilizers (standard) and gasoline engine (optional) with aluminium casing.
The above picture show a typical version of the pick-up model Dedalo 7.6050 (36 m high) mounted on IVECO DAILY truck, with 4 hydraulic stabilizers (standard) and gasoline engine (optional) with aluminium casing.
The above picture show a typical version of the pick-up model Dedalo 7.6050 (36 m high) mounted on ISUZU M21T truck, with 4 hydraulic stabilizers and LLS system. The LLS (Lateral Leveling System) allows the lateral stabilization of lifts installed in fixed mode on the truck, even on very high gradients (up to 23% slope), without the need to lift the truck from the ground..
Watch the video for Dedalo Pick-up:
The maximum ladder height on TOYOTA HI-LUX 4x2 is approximately 2.4 m.
A wide storage room is also available on the truck to lodge the load. The ladder is quickly set out by simply removing the 4 fixation pins.
Separation of the ladder on the pick-up is performed on special hydraulic stabilizers independently controlled via a hydraulic control valve with 4 individual joysticks. On request the ladder may be equipped with own wheels for travel to storage place. Operation of the elevating assembly may be performed independently from the truck.
All 4 side panels are removable and are fitted with
L-shaped steel brackets suitable for both horizontal and vertical
settings.
Turning platform dimensions to fit into windows opening: 1422x830 mm.
Rear side panel: 650(h) mm.
Lateral side panels: 450(h) mm.
Front side panels 600x250(h) mm.
All models from 24.3 m are equipped with a double cylinder controlling the ladder's inclination and avoiding twisting problems. The turning device has got a double braking system available: hand brakes to perform millimetric arrest and mechanical brakes featuring three arrest positions in each working position (the front and on the truck sides).
A safety system of stainless steel rods exclusively
designed by SCALA REALE prevents the ladder unit from sliding down
when load is put on the platform and saves the steel wire ropes from
bending.
An aluminium ladder extension ramp is equipped with telescopic prop to
support it whenever the lower end is not standing on ground.
All ladder elements are made out of heavy-duty aluminum
7000 series avoiding ladder bending even at maximum extension (see
picture).
| Description | Dedalo 5.4090 |
Dedalo 5.5050 |
Dedalo 7.4090 |
Dedalo 7.5050 |
Dedalo 7.6050 |
|
|---|---|---|---|---|---|---|
| Maximum lift stroke above ground level (at 85°) | m | 18 | 23.2 | 24.3 | 30.5 | 36 |
| Minimum lift stroke above ground level (at 30°) | m | 3.4 | 3.9 | 3.6 | 4.1 | 4.2 |
| Retracted ladder length | m | 4.29 | 5.25 | 4.33 | 5.29 | 6.29 |
| Total lift weight | kg | 650 | 690 | 915 | 990 | 1215 |
| Number of ladder lifting cylinders | - | 1 | 2 | |||
| Number of telescopic sections | - | 5 | 7 | |||
| Capacity | kg | 300 | ||||
| Platform speed | m/min | progressive 0-45 | ||||
| Platform rated speed range | m/min | 12-22-45 | ||||
| Electric power | - | single phase 230 V-50 Hz-2.4 kW | ||||
| Working angle | grades | from 30 to 85 | ||||
| Minimum electric protection | - | IP55 | ||||
FEATURES:
- Mechanical:
- Fixed mounted or hauled on truck
- Telescopic sections out of heavy-duty aluminum 7000 series
- Ladder locking system consisting of stainless steel rods
- Safety against breaking of the platform wire rope and of the sliding ladder rope
- 6 mm platform wire rope made out of special steel
- 5 mm sliding ladder rope made out of special steel
- Threaded hoists
- Millimetric stop of the turning device
- Turning platform fitting inside windows and balconies profile
- Removable platform extension sides
- Anti-slip aluminum floor on lift chassis
- Lower ladder extension made out of heavy-duty aluminum with telescopic props
- Hydraulic:
- 4 hydraulic double-acting stabilizers operated by control valve with 4 joysticks
- Hydraulic power supply for ladder inclination complete with double acting cylinder
- Safety overcenter valve
- Safety stop valves on all cylinders
- Electric:
- Advanced electronic lift management panel, ready for remote assistance
- Load cells for weight measurement on platform
- Load cells for measuring the tension of the rope of the ladders
- Remote control of the lift from smartphone or PC
- Advanced remote-assistance system for fault detection and resolution
- Parallel system to ensure the operation of the lift even in case of total failure of the electronics
- Electronic control systems for the cable's anti-loosening and overload (platform and ladders)
- Electronic measurement of lateral and vertical inclination
- GPS tracking system even during transfers
- Display for operating parameters and operator guidance
- All setting operations (up and down stroke and emergency arrest) are remote controllable from the lower control unit
- Control panel on the top of the lift (ascent, descent, emergency stop)
- Progressive acceleration and deceleration of the platform at departure and arrival
- Possibility to set the platform speed via the control panel
- Complete electronic protection of the main engine
- Operation with independent petrol engine (optional)
- Wireless radio control (optional)